42 records found.
| Title |
Bulletin No. |
Author(s) |
|---|
| 3D Modeling of Bolted Flanged Joints and Development of a Transducer for Measuring Gasket Contact Stress |
516 |
Olivier Sakr, Hakim A. Bouzid, Michel Derenne |
| A Review, Comparison And Modification Of Present Deflection Theory For Flat Perforated Plates Correlation Of Experimental Data With Theory For Perforated Plates With A Triangular Hole Array |
52 |
L. Deagle |
| An Overview and Validation of the Fitness-For-Service Assessment Procedures for Local Thin Areas in API 579 |
505 |
Janelle, J., Osage, D. A., Burkhart, S. J. |
| Analysis of the Effects of Temperature on Bolted Joints |
510 |
Warren Brown |
| Bending Of 2:1 And 3:1 Open-Crown Ellipsoidal Shells |
54 |
G.D. Galletly |
| Creep and Creep/Fatigue Crack Growth Modelling and Testing Methods Relevant to Life Assessment of Cracked Components |
512 |
K. M. Nikbin |
| Determination of the Gasket Effective Width for the ASME Proposed Flange Design Rules |
515 |
Hakim A. Bouzid, Mohammed Diany, Michel Derenne |
| Development of Design Rules for Conical Transitions in Pressure Vessels for the ASME B&PV Code, Section VIII, Division 2 |
521 |
J.C. Sowinski, Z. Cao, D.A. Osage, J. E. Brubaker, N.A. Carr |
| Development of Fitness-for-Service Rules for the Assessment of Hydrogen Blisters, HIC and SOHIC |
531 |
Jeremy C. Staats, Gerrit M. Buchheim, David A. Osage |
| Effect of Microfissures on Corrosion Performance and Mechanical Properties of Austenitic Stainless Steel Weld Metals |
502 |
C. D. Lundin and Yan Cui |
| Effect of the Misalignment of Piping Systems and Non Parallel Flange Faces on the Tightness of DN200 PN40 Flanged Joints |
513 |
Yves Birembaut |
| Examination of Mechanical Properties And Corrosion of High Temperature Alloys after Long Term Service under Advanced Power Plant Boiler Conditions The Eddystone Studies |
517 |
P. R. Boyles, T. Fukui, M. Igarashi, A. Iseda, N. Komai, F. Masuyama, O.Miyahara, Y. Minami, H. Mimura, H. Okada, M. Prager, S. Yamamoto |
| Fabrication and Repair of Low Alloy Steel Pressure Equipment |
525 |
M. Prager Editor |
| Factors Which Affect Low-Alloy Weld Metal Notch-Toughness |
59 |
S.S. Sagan and H.C. Campbell |
| Fourth Technical Progress Report Of The Ship Structure Committee |
55 |
|
| Half-Bead Temper-Bead Controlled Deposition Techniques for Improvement of Fabrication and Service Performance of Cr-Mo Steels |
506 |
Y. Wang, Carl D. Lundin, C.Y.P. Qiao, K. K. Khan, K. Al-Ejel, G. W. Batten |
| High Performance Cast ’-Strengthened nickel Based Superalloys – An Interpretive Report |
511 |
Leijun Li |
| How Plastic Deformation Influences Design And Forming Of Metal Parts Brittle Fracture In Mild Steel |
5 |
J.R. Low, Jr., J.S. Hoggart |
| IIW Recommendations for Fatigue Design of Welded Joints and Components |
520 |
A. Hobbacher |
| Improved Flange Design Method for the ASME, DIV. 2 Rewrite Project: Status of Present Design Methods |
514 |
Warren Brown |
| Interpretative Report Hardfacing and Wear |
504 |
Howard S. Avery and Paul C. Kamer |
| Interpretive Report On Welding Titanium And Titanium Alloys |
56 |
G.E. Faulkner and C.B. Voldrich |
| Long Term Pressurized Graphite Gasketed Joint Tests |
507 |
Luc Marchand, Michel Derenne, Olivier Sakr, Hakim A. Bouzid |
| Mechanical Properties of Cast ’-Strengthened Nickel Base Superalloys |
518 |
Leijun Li |
| METALLURGICAL STUDIES OF STEELS FOR SOUR SERVICE ENVIRONMENTS |
532 |
M. Prager Editor |
